Jiantong Geomembrane Laying Technology Got Improved
Jiantong Geomembrane Laying Technology Got Improved
We have improved the skills of the installation of our geomembrane products.
The laying and unfolding directions of the composite geomembrane are performed from E to W or from W to E, and each laying length is completed once including the height of the retaining walls on both sides.
The laying sequence is advanced from the axis of the channel to both sides S and N.
In the construction process, first make a mortar protective layer (20-30mm) of composite geomembrane at the bottom of the lake, and then paste it with the vertical retaining wall.
Adhesion process of composite geomembrane and retaining wall. Brush the adhesive on the bonding surface of the composite geomembrane and the retaining wall, dry for about 5 minutes, and then paste, squeeze, and flatten. The adhesive is made by mixing asphalt emulsion paint, cement and water. After the paste is completed, the anchor is anchored above the water level line, and waterproof and anticorrosive treatment is performed.
The strength of Shandong Jiantong Manufacturers provides you with good service and good products, including Jiantong HDPE and LDPE Geomembrane, Jiantong Geotextiles, and Jiantong Composite Geomembrane, as well as Jiantong Impermeability Membrane.
