How to Install HDPE Geomembrane Used for Biogas
How to Install HDPE Geomembrane Used for Biogas
Weeds, bricks, tiles, stones, etc. should not be put into the biogas digester to avoid scratching or blocking the biogas digester
If the biogas digester is not completely bulged, if there is a large amount of water on the surface caused by rain, it should be drained immediately
The inlet of the biogas digester (wastewater inlet channel), should avoid the entry of branches, plastic bags and other debris to block the inlet
Fences should be set up around the biogas digester, and there is a warning sign for biogas heavy ground within 100m. Fireworks are strictly prohibited to avoid people other than staff from approaching
The bulging height of the gas-produced top film of the biogas digester is normally 3-4m, if it is higher than 5m, it needs to be treated with an exhaust pipe
Biogas heavy ground is set within 100m of the biogas digester, and fireworks and other warning signs are strictly prohibited
The inlet of the biogas digester (sewage inlet channel) should avoid the entry of branches, plastic bags and other debris to cause the inlet to be blocked.