Our Geotextiles Applied in Water Conservation Project
Our Geotextiles Applied in Water Conservation Project
Geotextile rolls should be protected from damage before installation. Geotextile rolls should be stacked in a flat and non-water-filled place. The stack height should not exceed the height of four rolls, and the identification sheet of the roll can be seen. Geotextile rolls must be covered with opaque material to prevent UV aging.
During storage, the integrity of the label and the integrity of the information must be maintained. The geotextile roll must be protected from damage during transportation (including on-site transportation from the material storage site to the work site).
Spread geotextiles by hand, the surface of the cloth should be smooth, and the deformation allowance should be left appropriately.
Geotextiles are usually installed by several methods such as overlapping, stitching and welding. The width of stitching and welding is generally 0.1m or more, and the overlap width is generally 0.2m or more. Geotextiles that may be exposed for a long time should be welded or stitched.
